FEATURES
- Equipped with automatic dimming filter to protect your eyes
- Welding mask designed for long working period in complex working conditions.
- Higher visibility and color recognition
- Adjustable strap, light weight, suitable for carrying.
- Solar panel technology is very environmentally friendly
SPECIFICATION
I was skeptical about buying this welder because it is so competitively priced. I've been looking at welders for a couple of months for some little projects. I kept going back and forth between Miller and Lincoln but could not understand how they justify the prices. But I needed something immediately, fewer days later the welder and rod is on my porch. First I fixed my trailer, burning a couple of pounds of 6013 rod at the max current welding 1/4" channel to 3/8" pipe. The strike is easy, it flowed so nice I was actually proud of the welds. Then I went and spent 5 hours welding the structure to a 50' x 13' addition to my barn. I had already tacked everything together with my Hobart Mig. But the welds are just crap. The high tensile wire with flux does nothing but stick metal together. I started with 6011 rod on 16ga. square tubing, trusses, and purlins. I adjusted the amps from 55, 75, 100, 130. The arc was quick but the rod just wouldn't flow like the 6013. In was so hot it would burn through the steal. When I ran at too low an amp, the rod would stick. After a couple of pounds, I decided to go get the 6013. I adjusted the amps to 90 and this thing flowed like butter. The welds were strong, the rod flowed evenly, starting the arc was fantastically easy and I'm telling you this little jewel is a welding beast. The best part is the thing weighs nothing and runs on 110 volts. I cut my teeth on the 220 Volt Lincoln which requires a fortune in lead wire to reach. The problem with Lincoln is the welder is now over $300 and I'm not sure how they justify this price for 40 year old technology. The leads with the machine are longer than my mig making it no problem to reach 8'. I eventually attached it to my ladder and just ran up and down the structure. My welds were horizontal, vertical, and upside down on all galvanized metal. Any bad welds were attributed to the person welding and not the welder. Best tool purchase I have made in years. I'm just absolutely amazed at how well this welder worked.
Great value
For tiny inverter welder this thing does amazingly well on 110v alone. The pics I attached are with lincoln 3/32 7018 on 90 amps with dirty scrap angle, and it did surprisingly well in my opinion. I use 1/8 and 5/32 7018s at work so it took a little bit getting used to the wiggle of a full length 3/32 rod but other than my personal setbacks this thing did great! It would easily do DIY projects such as coffee tables or little repairs on 110v alone. I havent used it on 220v so I dont have an opinion on that but I'm assuming as long as you respect the duty cycle itll be fine.
Runs 1/8" 7018 like a champ. Haven't tried running it on 120 volts yet. Works very well on 240, though. Definitely upgrade the stock ground clamp.
Haven't had the machine long, and I don't typically write reviews, but I was so impressed I thought I should. I just welded about 300 foot of 1/8" 6011 rods, 220volt @ 90 amps, in a dusty environment, with 150 foot of 8/3 cable run straight from the breaker box. Machine never cut off, never overheated, and laid a bead the same as my $3k machine in the shop. It fit inside a 5 gallon bucket with the lid on so I tossed it in the back of my truck when I left....I don't really know what else I could ask for.
Don't ever expect to do any real welding with 120 volts - doubt the machine would do quite as well, but I didn't even attempt to run it 120v
112 people found this helpful
I was skeptical about buying this welder because it is so competitively priced. I've been looking at welders for a couple of months for some little projects. I kept going back and forth between Miller and Lincoln but could not understand how they justify the prices. But I needed something immediately, fewer days later the welder and rod is on my porch. First I fixed my trailer, burning a couple of pounds of 6013 rod at the max current welding 1/4" channel to 3/8" pipe. The strike is easy, it flowed so nice I was actually proud of the welds. Then I went and spent 5 hours welding the structure to a 50' x 13' addition to my barn. I had already tacked everything together with my Hobart Mig. But the welds are just crap. The high tensile wire with flux does nothing but stick metal together. I started with 6011 rod on 16ga. square tubing, trusses, and purlins. I adjusted the amps from 55, 75, 100, 130. The arc was quick but the rod just wouldn't flow like the 6013. In was so hot it would burn through the steal. When I ran at too low an amp, the rod would stick. After a couple of pounds, I decided to go get the 6013. I adjusted the amps to 90 and this thing flowed like butter. The welds were strong, the rod flowed evenly, starting the arc was fantastically easy and I'm telling you this little jewel is a welding beast. The best part is the thing weighs nothing and runs on 110 volts. I cut my teeth on the 220 Volt Lincoln which requires a fortune in lead wire to reach. The problem with Lincoln is the welder is now over $300 and I'm not sure how they justify this price for 40 year old technology. The leads with the machine are longer than my mig making it no problem to reach 8'. I eventually attached it to my ladder and just ran up and down the structure. My welds were horizontal, vertical, and upside down on all galvanized metal. Any bad welds were attributed to the person welding and not the welder. Best tool purchase I have made in years. I'm just absolutely amazed at how well this welder worked.
Great value
For tiny inverter welder this thing does amazingly well on 110v alone. The pics I attached are with lincoln 3/32 7018 on 90 amps with dirty scrap angle, and it did surprisingly well in my opinion. I use 1/8 and 5/32 7018s at work so it took a little bit getting used to the wiggle of a full length 3/32 rod but other than my personal setbacks this thing did great! It would easily do DIY projects such as coffee tables or little repairs on 110v alone. I havent used it on 220v so I dont have an opinion on that but I'm assuming as long as you respect the duty cycle itll be fine.
Runs 1/8" 7018 like a champ. Haven't tried running it on 120 volts yet. Works very well on 240, though. Definitely upgrade the stock ground clamp.
Haven't had the machine long, and I don't typically write reviews, but I was so impressed I thought I should. I just welded about 300 foot of 1/8" 6011 rods, 220volt @ 90 amps, in a dusty environment, with 150 foot of 8/3 cable run straight from the breaker box. Machine never cut off, never overheated, and laid a bead the same as my $3k machine in the shop. It fit inside a 5 gallon bucket with the lid on so I tossed it in the back of my truck when I left....I don't really know what else I could ask for.
Don't ever expect to do any real welding with 120 volts - doubt the machine would do quite as well, but I didn't even attempt to run it 120v
112 people found this helpful
